6mm Scenic Frenzy

As you'll recall from my (now-retired) schedule for 2012, I was going to spend August on 6mm terrain and scenics, so here are some belated pictures from that effort. Most of these are still ongoing, and will probably linger on my table for the rest of the year. When I'm bored with prepping figures, I'll spend on time on these.

First up is a massive ruined factory from Gamecraft Miniatures. This is made of acrylic (thin plexiglass), but the roofs, doors, and interior walls and floors are scratchbuilt by me. The interior walls are actually ruined floors from Gamecraft's city ruins line, just turned on their side. I had some spares when I put together the city ruins (no photos of that project yet, it got packed away).

Some 6mm ACW figures for scale:

The kit gives you the option of putting the entrance together with a Soviet star or German swastika, and I went with the latter since my project plans call more for late war fighting at the moment.

I also have been working on the sci-fi outpost buildings available from Angel Barracks, mainly painting them with leftover paint from other paintjobs.  Mostly I'm doing these in metallics, as if they're being built from the scraps of ruined spaceships.  The terrain will be a grey, moon-like finish when done (needs a final drybrushing).  These aren't quite done yet, but I've blocked in most of the bigger panels.

These are some sci-fi Jetson-like urban buildings built from trophy/plaque bases, as someone demonstrated once on The Miniatures Page.  These are 3 of the 5 I did, and have been primed, but the grey was darker than I anticipated, so I need to hand paint them a lighter grey.  The others will be yellow and white.  I need to improve my technique a bit, as too much grain is showing from up close, but I'll live with these ones.

Some JR Miniatures huts, for fantasy and any future ancients or medieval projects in 6mm.

A wall section for my 6mm High Elven city.  A few years ago I picked up some fancy wood trim on sale for cheap at the local craft superstore, and finally found a use for it.  The wall itself is just a strip of balsa, with the blocks scribed in, and the trim glued to the top and later cut.  I have enough for a 36" wide by 12" deep portion of the city (sitting on the table's edge) and a small 8"x6" or so fortress.  The wall sections will be interrupted by towers, also scribed and then capped by some fancy wood bits to look like organic-inspired towers.  Those will be shown once I get them coated with sandable sealer.

Inside the elven city will be a large water fountain, with these statue of an elven hero standing in the middle.  He's actually an old 25mm fantasy figure, making the statue about 25' tall.  As usual, photographing white didn't turn out so well, but he's been painted a winter white and drybrushed with a metallic white to make him look like marble, with a gold staff and sitting on a jade base.

And here's most of what else got started in August.  At the back centre-left is a Simply 6 ruined building; back centre-right is one of those Gamecraft city ruins I mentioned above.  This was the demo one (to see if the matt board warped when primed - it didn't), it still needs to be painted properly.  In front of it is a ruined cathedral, in the process of being primed with black gesso.  Also in the pic are two ruined castles from JR Miniatures, a ruined bridge and farm complex from Simply 6, three Baccus bridges, and some Baccus stone fences (bottom left).